Free Box Dieline Generator
A dieline is the flat template of a box that shows where it is cut and folded. This generator draws one for your inside size in 14 styles, including tuck end, auto-lock bottom and mailer boxes, as SVG, PDF or DXF; Vorex prints them with no minimum order quantity, free digital design and dieline, and free shipping on every order.
Updated
Want to see a style printed first? Order from 1 piece: browse box styles.
- Cut line
- Fold / crease
- Bleed 0.125 in
- Safe zone 0.125 in
- Glue area
Free dieline templates by style
Which dieline style should I use?
Each style below has its own generator page with ready-made sizes. Dimensions are always the inside size of the box.
| Style | What it is | Typical use |
|---|---|---|
| Reverse tuck end box | Folding carton; top tuck hinges from the back, bottom tuck from the front | Cosmetics, candles, retail cartons |
| Straight tuck end box | Folding carton; both tucks hinge from the back panel | Products shown face-up, window cartons |
| Auto-lock bottom box | Tuck top with a pre-glued bottom that locks when the box is opened | Heavier items, fast hand packing |
| Snap lock bottom box | Tuck top with a 1-2-3 folded locking bottom, no glue on the base | Medium-weight cartons, jars, bottles |
| Seal end carton | Glued major and minor flaps at both ends | Food and cereal cartons, multipacks |
| Mailer box | Roll end front tuck box from one sheet, folded double side walls | E-commerce shipping, subscription boxes |
| Pizza box | Corrugated base with rolled double walls and a hinged tuck lid | Pizza and flat food items |
| Two-piece box (tray and lid) | Separate tray and lid | Gift boxes, apparel, presentation sets |
| Counter display box | Counter display with a printed header and low front wall | Retail counter displays of small items |
| Gable box | Carry box with a handle top and auto-lock bottom | Bakery, takeout, party favours |
| Pillow box | One-piece box with curved end scores, closes by pressing | Gift cards, jewelry, small favours |
| Sleeve | Open-ended wrap with four panels and a glue flap | Over trays, soap bars, drawer boxes |
| Hexagon box | Six side panels with hexagonal lid and base | Candles, gifts, premium cosmetics |
| Cake box with window | Bakery box with glued corners, hinged lid and a window | Cakes, pastries, cookies |
Dieline terms explained
- Dieline
- The flat template of a box that shows where the board is cut and where it is folded.
- Cut line
- The outline the cutting die follows; drawn as a solid line.
- Fold line (crease)
- Where the board is scored so it folds cleanly; drawn as a dashed line.
- Bleed
- Artwork that runs past the cut line so no white edge shows after cutting; 0.125 in (3.2 mm) on these templates.
- Safe zone
- The inner margin, 0.125 in (3.2 mm) here, where text and logos stay so cutting cannot clip them.
- Glue flap
- The narrow flap glued to the opposite panel to close the tube of a folding carton.
- Dust flap
- Small side flaps under a tuck closure that keep the box square and keep dust out.
- Inside dimensions
- Length, width and height of the space inside the folded box; the generator adds board allowances from these.
From template to printed box
- Pick the box style. Choose the style and enter the inside length, width and height in inches or millimetres.
- Set the board. Choose SBS paperboard, E-flute corrugated or a custom thickness, and adjust the glue and tuck flaps if you need to.
- Download the template. Download the dieline as SVG or PDF. Both are drawn at actual size.
- Check the scale. Print the PDF at 100% (actual size) and measure the 1 in bar in the legend, then cut and fold a test sample.
- Place your artwork. Open the file in Illustrator, Affinity, Inkscape or Canva, keep the dieline on its own layer, extend backgrounds to the bleed line and keep text inside the safe zone.
- Send it to print. Ask your printer to confirm the final die line for their board, then send the artwork for a proof.
Dieline questions
Is there a charge for the dieline generator?
Will the PDF print at the right size?
Which programs open the files?
Are the dimensions inside or outside?
Can you print the box for me?
What is a dieline?
What file does a printer need for a dieline?
What is the difference between bleed and the safe zone?
How do I measure a box for a dieline?
Which dieline style should I choose?
Popular custom packaging you can order now
Each one is made to order and printed with your artwork. Prices are for one listed piece; any other size or quantity is priced in a custom quote.








